  |
The heavy metals such as manganese (Mn), cadmium (Cd), zinc (Zn), chromium (Cr), lead (Pb), nickel (Ni), copper (Cu) and iron (Fe) were determined in domestic, commercial and industrial soot samples via atomic absorption spectrophotometer. The vehicle soot samples showed highest concentration of investigated heavy metals as compared to other soot samples. It was also found that the concentration of Fe was high in the soot samples (range 5.75 – 1105 mg/Kg) followed by Cu (70 – 990 mg/Kg) while the concentration of Ni was lower (range 0.5 – 3 mg/Kg). It was also found that the concentration of Mn and Fe was decreased as decreased the size of the soot samples while the concentration of other investigated heavy metals increased as decreased the size fraction.
From Yousaf Iqbal 1 | Syed Muhammad Sohail 1 | Imtiaz Ahmad 1 | Khalid Saeed 1 2
1Institute of Chemical Sciences, University of Peshawar, Peshawar-25120, Khyber Pakhtoonkhwa, Pakistan
2Department of Chemistry, University of Malakand, Chakdara, Dir (Lower), Khyber Pakhtoonkhwa, Pakistan
2Department of Chemistry, University of Malakand, Chakdara, Dir (Lower), Khyber Pakhtoonkhwa, Pakistan
(Received 19.07.2011; revised 02.03.2012)
Appeared in Tenside Surfactants Detergents 2012/04, Page 300-305
Direct link: http://www.tsd-journal.com/TS110195
Pay content
Determination of Heavy Metals in Domestic, Commercial and Industrial Soot Samples [184 KB]
Free access for subscribers.
References
1 Gundogan, R., Acemioglu, B. and Alma, M. H.: J. Colloid Interface Sci. 269 (2004) 303.
2 Saeed, K., Park, S.-Y. and Oh, T. J.: J. Appl. Polym. Sci. 121 (2011) 869.
3 Jain, C. K., Singhal, D. C. and Sharma, M. K.: J. Hazard Mater. 114 (2004) 231.
4 Sekar, M., Sakthi, V. and Rengaraj, S.: J. Colloid Interface Sci. 79 (2004) 307.
5 Iqbal, M., Saeed, A. and Zafar, S. I.: J. Hazard Mater. 148 (2007) 47.
6 Swaine, D. J.: Fuel Proc. Technol. 65–66 (2000) 21.
7 Reffas, H., Benabdallah, T., Youcef, M. H. and Ilikti, H.: Tenside Surf. Det. 06 (2009) 361.
8 Saeed, K, Ishaq, M., Ahmad, I., Shakirullah, M. and Haider, S.: J. Chem. Soc. Pak 32 (2010) 162.
9 Tofighy, M. A. and Mohammadi, T.: J. Hazard Mater. 185 (2011) 140.
10 Saeed, K., Ishaq, M., Ahmad, I., Shakirullah, M., Park, S. Y., Khan, H. and Ali, N.: J. Chem. Soc. Pak. 28 (2006) 207.
11 Errecalde, M. F., Boluda, R., Lagarda, M. J. and Farre, R. Indices.: J. Suelo y Planta 1 (1991) 483.
12 Infinte, R. and Acosta, I. L.: Atmos. Environ. B-Urb. 25 (1991) 121.
13 Hussain, I., Khan, L. and Mahmood, T.: J. Chem. pak. 28 (2006) 246.
14 Hussain, I.: J. Chem. pak. 28 (2006) 241.
15 Smith, K. A.: Manganes and Cobalt in heavy metals in soils, Ed. B. Alloway, Blackie: Glasgow (1990) 197.
16 Nogawa, K. and Nariagu, J. O.: J. Weilly interscience Publication John weilly and Sons, Inc. Canada (1981).
17 Sverdrup, L. E., Krogh, P. H., Nielsen, T., Kjaer, C. and Stenersen, J.: Chemosphere 53 (2003) 993.
18 Ewing, G. W.: McGraw-Hill, New York (1985).
19 Xiang, Y., Liu, Y. and Lee, M. L.: J. Chromatography A. 2 (2006) 198.
20 Gary, J. M. and Phillips, W. D.: J. Environ Health prospect. 108 (2000) 413.
21 Buco, S., Moragues, M., Doumenq, P., Noor, A. and Mille, G.: J. Chromatography. 1026 (2004) 223.
22 Priego-Capote, F., Luque-Garcia, J. L. and Luque de Castro, M. D.: J. Chromatography 994 (2003) 159.
23 Khan, A. F., Hussian, I., Chishti, A. K., Khattack, R. M., Shah, H. M. S., Khan, A. M. and Shah M. M. S.: American-Eurasioan J. Agric & Environ Sci. 10 (2011) 434.
24 Zdzislaw, M., Migaszewski.; Galuszka, A. and Paslawski, P.: J. Envir Inter. 28 (2002) 303.
25 Nriagu, J. Copper in the environment. Part-I ecologicalCycling, Willry New York (1987) 217.
|
| © 2013 by Carl Hanser Verlag |
Navigation
- Current issue
- Volumes
- Search
- Top 20 Downloads
Subscriber Support
abo-service@hanser.de
For authors:
Information on article submission
- Volumes
- Search
- Top 20 Downloads
Subscriber Support
abo-service@hanser.de
For authors:
Information on article submission
Document number